|
Rudder
and Tiller:
Attach the rudder to the tiller using the supplied bolt and
washers.
The
washers should sit between the tiller and the rudder, one on each
side. Lock the rudder up and attach it to the boat by passing
the tiller under the traveler and lining up the rudder pin with the
pintles. The bottom groove should fit into the bottom pintle, and
when you push down on the spring loaded pin, the top groove will
slide into the top pintle.
Release
the spring and lock the rudder in place, making sure the rudder is
securely connected to the boat at both top and bottom.
|
